Context Menu Reference

Complete reference for every right-click context menu action available in Project Mode. Actions are grouped by the element you right-click on.

Components

Right-click on a component node to access these actions.

Action	Icon	Description
Change Category submenu	category	Switch component type. Connector option includes shape submenu (rectangular, circular, D-sub, etc.).
Mating Behavior submenu	settings_input_component	Set mating rules: Default (from shape), Receptacle, Pin, etc.
Assign Part from BOM submenu	inventory_2	Assign a BOM connector part to this component. Lists available parts with MPN and manufacturer. Shown when BOM has connector entries.
Bulk Connect	link	Connect all pins to a target component by position (pin 1 to pin 1, etc.). Requires pins configured on both components.
Add Bundle to...	add_link	Draw a new bundle from this component to another node. Layout mode only.
Mate submenu	mate	Contains: Bulk Mate (multi-pin mating), Add Mate... (select connector and pin), and existing mates list with remove option.
Align Mated Connectors	align-to-pins	Align connectors mated to this terminal point so their pins line up. Shown for terminal points with mates.
Device Group submenu	workspaces	Contains: Add to Group / Create New Group / Remove from Group / Select Device Group (shown contextually)
Visual Group submenu	crop_free	Contains: Add to Visual Group (select existing) / Create Visual Group
Topology submenu	account_tree	Contains: Convert to Branch Point (convert component to routing junction, removes pins). Not available for flying leads.
Set Size submenu	aspect_ratio	Contains: Set All Components to This Size, Set All [Category] to This Size, Set All [Shape] Connectors to This Size. Shown when component has a custom size.
Fit to Content submenu	fit_screen	Auto-size component to fit its pins. Submenu includes: Fit to Content, Fit Selected to Content, Fit All [Category] to Content, Fit All Components to Content.
Pages submenu	article	Toggle page assignment, move to page, or remove from current page. Shown when plan has multiple pages.
Copy Pin Table	content_copy	Copy pin table to clipboard as TSV (for pasting into Excel). Shortcut: `Ctrl+Shift+C`
Delete	delete	Remove component from the plan. All connected bundles are also deleted, cascading to their conductors, wire groups, cable assignments, and splices.

Branch Points

Right-click on a branch point to access these actions. Topology operations are grouped in the Topology submenu.

Action	Icon	Description
Topology submenu	account_tree	Contains: Join Bundles (remove BP, merge connected bundles), Merge Branch Points (absorb another BP into this one), Move to Bundle (reposition BP onto a different bundle), Convert to Component (promote to full component with pins). See Bundle Operations for details.
Reset Label Positions	restart_alt	Reset label sides and offsets for conductors through this branch point. Schematic mode only.
Delete	delete	Remove branch point and all connected bundles. Conductors, wire groups, cable assignments, and splices on those bundles are cascaded — any splice left with fewer than two conductors is automatically deleted.

Flying Leads

Right-click on a flying lead to access these actions.

Action	Icon	Description
Topology submenu	account_tree	Contains: Convert to Component (promote flying lead to full component with a different category).
Delete	delete	Remove flying lead

Bundles

Right-click on a bundle to access these actions.

Action	Icon	Description
Cross Section	donut_large	View bundle cross-section showing conductor layout
Insert Branch Point	add_circle_outline	Split this bundle at the midpoint, creating a new branch point. The original bundle becomes two bundles, and all conductors pass through the new branch point automatically.
Reroute Conductors... submenu	alt_route	Move conductors on this bundle to an alternative physical route between their endpoints. Conductors are grouped by endpoint pair, with each group showing available paths. Only appears when at least one conductor has an alternative route through the topology.
Join with... submenu	merge	Join this bundle with an adjacent bundle through a shared branch point, combining them into a single bundle. Only available when the branch point has no splices defined. See Bundle Operations for details.
Consolidate Bundles	compress	Consolidate selected bundles into a trunk structure. Requires multi-selection of 2+ bundles. See Bundle Operations for details.
Redirect... submenu	alt_route	Change the source or target endpoint of this bundle. When the bundle carries conductors, a second submenu offers: Delete remaining — discard conductor segments beyond the redirected bundle. Keep as new conductors — split the original conductor, preserving leftover segments as new conductors. Bridge bundles extend conductor paths automatically; loops are trimmed automatically.
Waypoints submenu	edit_road	Contains: Edit Waypoints (add/move control points for Bezier curves), Clear Waypoints (remove all waypoints), Reset to Default (restore default path routing). Layout mode only.
Pages submenu	article	Toggle page assignment or move to page. Shown when plan has multiple pages.
Delete Bundle	delete	Remove this bundle and all of its conductors. Connected pins are disconnected. Associated wire groups, cable assignments, and conductor splices are also cleaned up — any splice left with fewer than two conductors is automatically deleted.

Conductors — Schematic Mode

Right-click on an individual conductor path in Schematic Mode to access these actions.

Action	Icon	Description
Disconnect from [Pin]	link_off	Remove conductor's connection to the specified endpoint pin
Disconnect Both Pins	link_off	Remove conductor from both endpoint pins at once
Reroute via... submenu	alt_route	Change which bundles this conductor travels through between its endpoints. Lists all valid paths with the current path checked. Only appears when two or more routes exist between the conductor's endpoints.
Show as Label / Show as Wire	label	Toggle between full wire path and stub + destination label rendering. Label mode replaces long conductor paths with short stubs and boxed endpoint labels. Schematic mode only. See Connection Labels.
Reset Trunk Positions	restart_alt	Reset this conductor's trunk and tap positions to auto-calculated defaults
Twist with... submenu	gesture	Create a twisted wire group with another conductor on the same bundle. Submenu lists available conductors. See Wire Groups & Cables.
Add to Wire Group submenu	compress	Add this conductor to an existing wire group on the same bundle. Submenu lists available groups. Shown when wire groups exist on the bundle.
Add to Cable submenu	cable	Add this conductor as a core to an existing cable on the same bundle. Submenu lists available cables. Shown when cables exist on the bundle.
Delete Conductor	delete	Remove this conductor from the bundle entirely. References in wire groups and cable assignments are cleaned up, and any splice that drops below two conductors is automatically deleted.

Pins

Right-click on a component pin to access these actions. The context menu header shows the pin's designator and label (e.g., X1.3 or CB1.V_IN).

Action	Icon	Description
Disconnect "[Conductor]"	link_off	Remove a specific conductor from this pin. One entry per connected conductor.
Move "[Conductor]" submenu	alt_route	Reassign a conductor's pin connection. The submenu lists all component nodes with their pins. Behavior depends on whether the target pin is occupied: Unoccupied pin — click to move the conductor directly to the new pin. Occupied pin (shown with a dot indicator) — opens a sub-submenu with two choices: Move Here — move this conductor to the pin, displacing the current occupant. Swap — exchange pin assignments between the two conductors.
Move Mate submenu	mate	Reassign mate connection to a different pin on the same connector. Shown when pin has mate connections.
Disconnect All	link_off	Remove all conductors from this pin (shown when 2+ connections)

Device Groups

Right-click on a device group header to access these actions.

Action	Icon	Description
Select All Members	select_all	Select all components belonging to this device group
Add Selection to Group	playlist_add	Add currently selected nodes to this device group (shown when selection exists)
Set All to Size of submenu	aspect_ratio	Apply one member's dimensions to all other members (submenu lists members). Requires 2+ members.
Save to Library	save	Save this device group configuration to the library for reuse
Delete Group	delete	Remove the device group container (member components are preserved)

Visual Groups

Right-click on a visual group box to access these actions.

Action	Icon	Description
Edit Properties	tune	Configure group name, color, and visual style
Bring to Front	flip_to_front	Raise visual group to top rendering layer
Send to Back	flip_to_back	Lower visual group to bottom rendering layer
Delete Group	delete	Remove visual group box

Notes

Right-click on a plan note to access these actions.

Action	Icon	Description
Edit Note	edit	Open the note in the Properties panel for editing content, title, type, and class.
Delete Note	delete	Remove the note from the canvas.

Multi-Selection

Right-click with 2 or more items selected to access these actions.

Action	Icon	Description
Copy	content_copy	Copy selected items to clipboard. Shortcut: `Ctrl+C`
Bulk Connect to...	link	Connect all selected components to a target component by pin position
Assign Part from BOM submenu	inventory_2	Assign a BOM connector part to all selected components. Shown when all selected are non-flying-lead components and BOM has entries.
Change Category submenu	category	Switch category for all selected components. Connector option includes shape submenu. Shown when all selected are non-flying-lead components.
Mating Behavior submenu	settings_input_component	Set mating rules for all selected components. Shown when all selected are non-flying-lead components.
Set Conductor Properties submenu	tune	Set gauge, color, or stripe for all selected conductors. Shown when conductors are selected.
Show Selected as Labels	label	Switch all selected conductors to label display mode (stub + destination label). Schematic mode only, shown when conductors are selected.
Show Selected as Wires	horizontal_rule	Switch all selected conductors back to full wire path rendering. Schematic mode only, shown when conductors are selected.
Twist Selected	gesture	Create a twisted wire group from the selected conductors. Requires 2+ conductors on the same bundle. Shown when conductors are selected in Schematic view.
Bundle Selected	compress	Create a bundled wire group from the selected conductors. Requires 2+ conductors on the same bundle. Shown when conductors are selected in Schematic view.
Create Cable	cable	Create a cable from the selected conductors with auto-numbered core mappings. Requires 2+ conductors on the same bundle. Shown when conductors are selected in Schematic view.
Add to Wire Group submenu	compress	Add selected conductors to an existing wire group. Submenu lists groups on the bundle. Shown when wire groups exist and conductors are selected.
Add to Cable submenu	cable	Add selected conductors as cores to an existing cable. Submenu lists cables on the bundle. Shown when cables exist and conductors are selected.
Untwist Selected	gesture	Remove selected conductors from their twist groups. Shown when selected conductors belong to twist groups.
Pages submenu	article	Assign to page, move to page, or remove from current page. Shown when plan has multiple pages.
Fit Selected to Content	fit_screen	Auto-size all selected components to fit their pins. Shown when components are selected.
Delete [N] Items	delete	Remove all selected nodes and bundles. Deletion cascades: removing a node also removes its connected bundles, and removing a bundle also removes its conductors, wire groups, cable assignments, and splices. Shortcut: `Del`
Align submenu	align_horizontal_left	Six options: Left, Center Horizontal, Right, Top, Center Vertical, Bottom. Plus Align to Pins when all selected are mated terminations. Requires 2+ nodes.
Distribute submenu	space_bar	Horizontal (Even), Vertical (Even), plus custom spacing options. Requires 3+ nodes.
Arrange submenu	auto_fix_high	Contains: Auto-Arrange (requires 3+ nodes), Inform from Layout / Inform from Schematic (copy positions from the other view mode). Requires 2+ nodes.
Redesignate...	label	Rename and renumber selected components using bulk dialog
Set All to Size of submenu	aspect_ratio	Apply one member's dimensions to all selected (submenu lists members). Requires 2+ components.
Create Device Group	workspaces	Group selected components into a new device group. Requires 2+ nodes.
Create Visual Group	crop_free	Draw a visual group box around selected nodes. Requires 2+ nodes.
Align Labels submenu	format_line_spacing	Align bundle label positions: To Start, To Center, To End, or Match First. Requires 2+ bundles selected, layout mode only.
Consolidate Bundles	compress	Consolidate selected bundles into a trunk structure. Requires 2+ selected bundles. See Bundle Operations for details.
Add Covering submenu	layers	Add a covering (loom, sleeve, tape, etc.) to selected bundles. Requires 1+ bundles selected, layout mode only.

Canvas Background

Right-click on empty canvas space to access these actions. Use C to add a component and B to add a branch point.

Action	Icon	Description
Draw Visual Group	crop_free	Start drawing a visual group box
Device Group Library	workspaces	Browse and place saved device group configurations
Subassembly Library	account_tree	Browse and insert saved subassembly templates
Redesignate...	label	Open the redesignate dialog for bulk renumbering
New Page	note_add	Create a new page. Shown when plan has pages.
Duplicate Current Page	content_copy	Duplicate the current page with all assignments. Shown when on an active page.
Fit to View	fit_screen	Zoom and pan to show all elements
Fit All Components to Content	aspect_ratio	Auto-size every component to fit its pins. Shown when components exist.
Arrange submenu	auto_fix_high	Shown when components exist. Contains: Auto-Arrange (layered graph layout minimizing edge crossings), Inform from Layout / Inform from Schematic (copy positions from the other view mode, adjusting for pin panel height differences).
Align All Mates to Pins	align-to-pins	Align all mated connectors to their terminal point pins. Shown when mates exist.
Display submenu	tune	Display preferences. Contains: New Connections (toggle Wire/Label default for new conductors), Display Mode (cycle Bundles Only / Bundles + Conductors / Conductors Only, layout), Show/Hide Empty Pins (schematic), Show All as Labels (schematic), Show All as Wires (schematic).
Maintenance submenu	build	Contains: Clean Up Unassigned (remove unconnected conductors, shown when they exist), Delete Empty Bundles (remove bundles with zero conductors, shown when they exist), Repair Plan Data (fix broken paths, stubs, duplicates), Design Rule Check (run DRC rules).
Reset Positions submenu	restart_alt	Reset schematic positioning. Contains: Reset All Trunk Positions, Reset All Jog Positions (shown when jog offsets exist), Reset All Label Positions (shown when label offsets exist). Schematic mode only.
Clear Canvas	delete_sweep	Remove all elements from the canvas (destructive, confirms first)